Home / FAQs

FAQs

What information is required when placing an order for a Scaletron Scale?

All Scaletron Scales can be calibrated to kg or lbs.
When ordering a scale, please advise what to set the calibration to, kg or lbs.

When 150 lbs cylinder scales are set to kg, they are calibrated to 68 kg. If you need them calibrated to 70 kg instead, please advise. In case you need to change the calibration from 68 kg to 70 kg or vice-versa, please advise and we will provide guidance on how to change the calibration.

What information do I need to provide, to size an Odour Control System?

For a quote on an OCU here are the information we need to size the system correctly:

  1. We need to know the type of OCU system you need: activated carbon, chemical scrubber, combination etc.
  2. Provide the air flow rate in Nm3/hr or m3/hr.
  3. Or provide the volume to be treated and the number of air changes (ACH).
  4. the type of pollutants that needs to be treated and removed
  5. The concentration of pollutants at the inlet.
  6. The removal efficiency desired.
  7. It is always preferable that we receive complete specifications and P&ID’s to insure controls, instruments and D/S requirements are complied with.
What information is required for a static mixer quote?

Static mixers are custom designed for specific process.
For a quote on a static mixer, please provide the following information:

  1. Main line size
  2. Media being handled
  3. Is potable water certified product (NSF 61) required
  4. Main flow rate
  5. Injected chemical type, injection rate and concentration
Top